 |
OBD BMW Diagnostic Connector - Kit A
(#32011)
High quality OBD Connector for BMW (20-pin). Take a look to the Allocation pattern.
This cable have the pinout like in the schematic shown above, and is TachoPro compatible. The OBD cable is NOT designed to be used in conjunction with Elm family of interfaces. Plugging the cable directly into the PC may damage the serial port.
|
20 €
|
 |
OBD BMW Diagnostic Connector - Kit B
(#35006)
OBD Connector for BMW (20-pin). Five īPinsī are included.
The OBD connector is NOT designed to be used in conjunction with Elm family of interfaces. Plugging the cable directly into the PC may damage the serial port.
|
24 €
|
 |
OBD Mercedes Diagnostic Connector - Kit A
(#32012)
High quality OBD Connector for Mercedes (38-pin). Take a look to the Allocation pattern.
This cable have the pinout like in the schematic shown above, and is TachoPro compatible. The OBD cable is NOT designed to be used in conjunction with Elm family of interfaces. Plugging the cable directly into the PC may damage the serial port.
|
18 €
|
 |
OBD Mercedes Diagnostic Connector - Kit B
(#35007)
OBD Connector for Mercedes Benz (38-pin). Four īPinsī are included.
The OBD connector is NOT designed to be used in conjunction with Elm family of interfaces. Plugging the cable directly into the PC may damage the serial port.
|
24 €
|
 |
OBD Adapter VAG 2x2 to OBD-2 (female)
(#32008)
Connect the 2x2 socket from older VAG-cars to the OBD-2 cable, with molded connectors and strain relief. HighQuality - industrial made article. Take a look to the Allocation pattern.
This cable is TachoPro compatible. The OBD cable is NOT designed to be used in conjunction with Elm family of interfaces. Plugging the cable directly into the PC may damage the serial port.
|
18 €
|
 |
OBD Cable-Connection BMW
(#32007)
High quality OBD (BMW 20-pin) to Female DB9 cable, Cable length about 2.0 m (6-foot), with molded connectors and strain relief. Take a look to the Allocation pattern.
This cable is TachoPro compatible. The OBD cable is NOT designed to be used in conjunction with Elm family of interfaces. Plugging the cable directly into the PC may damage the serial port.
|
18 €
|
 |
OBD Cable-Connection for CarSoft 3.x
(#32020)
This cable is a addon to every K/KL Interface Set, this cable connected to the K/KL Interface Interface allows to use CarSoft 3.x diagnostic software for BMW.
CarSoft 3.x software requires two comports (fixed on COM1 and COM2) and it supports BMW cars up to September 1996.
This cable is TachoPro compatible. The OBD cable is NOT designed to be used in conjunction with Elm family of interfaces. Plugging the cable directly into the PC may damage the serial port.
|
18 €
|
 |
OBD Cable-Connection Mercedes Benz
(#32006)
High quality OBD (Mercedes 38-pin) to Female DB9 cable, cable length about 2.0 m (6-foot), with molded connectors and strain relief. Take a look to the Allocation pattern.
This is TachoPro compatible. The OBD cable is NOT designed to be used in conjunction with Elm family of interfaces. Plugging the cable directly into the PC may damage the serial port.
|
25 €
|
