 |
OBD Adapter Cable Mercedes to OBD-2
(Mercedes38M -> J1962F)
(#32033)
High quality OBD (Mercedes 38-pin) to Female OBD-2 / EOBD; cable length about 0.3 m (1-foot); with molded connectors and strain relief.
|
24 €
|
 |
OBD Adapter cable BMW to OBD-2
(BMW20M -> J1962F)
(#32034)
High quality OBD (BMW 20-pin) to Female OBD-2 / EOBD; cable length about 0.3 m (1-foot);
with molded connectors and strain relief.
|
25 €
|
 |
OBD-2 Break-Out-Box
(#32019)
Male OBD2 (SAE J1962 type A+B) to Breakout Box, cable length about 2.0 m
The OBDII Breakout Box provides standard banana plug connection points to all lines in the J1962 cable. This allows easy connection to individual lines on a J1962 connector without interfering with the connection between the vehicle and the tool.
|
165 €
|
 |
OBD-2 Cable 'cut off'
(#30048)
Male OBD2 (SAE J1962) to open end ('cut off'), cable length about 2.5 m
All 16 pins are wired, so you can built your individual cable. Absolut high-quality, industrial-made cable with shield.
Warning: Plugging the cable directly into the PC may damage the serial port. The OBD-II cable is designed to be used in conjunction with any interface which isolate your computer from the vehicle's electrical system.
|
24 €
|
 |
OBD-2 Cable-Connection A
(#30006)
High quality OBD-2 (SAE J1962) to Female DB9 cable, Cable length about 1.2 m (4-foot), with molded connectors and strain relief.
Works with all of our OBD-II interfaces, as well as interfaces made by other scan tool manufacturers, and even some home-made interfaces.
|
21 €
|
 |
OBD-2 Cable-Connection B
(#30020)
Male OBD2 to Female DB9, Cable length about 1.8 m
Plug not standard after SAE J1962: no centre web.
|
23 €
|
 |
OBD-2 Cable-Connection C
(#30045)
Male OBD2 (SAE J1962) to male(!) DB9, Cable length about 1.2 m
Warning: The OBD-II cable is designed to be used in conjunction with ElmScan family of interfaces (or other interfaces, which isolate your computer from the vehicle's electrical system). Plugging the cable directly into the PC may damage the serial port.
|
70 €
|
 |
OBD-2 Cable-Connection D
(#30046)
Bent Obd-2 (SAE J1962) plug on DB9 9-polig serially (female!),
Cable length about 1.2 m
|
60 €
|
 |
OBD-2 Cable-Connection E
(#30047)
Bent Obd-2 (SAE J1962) plug on DB9 9-polig serially (male!),
Cable length about 1.2 m
|
60 €
|
 |
OBD-2 Cable-Connection F
(#32015)
Male OBD2 to Female DB9, cable length about 2.0 m
Plug standard after SAE J1962.
|
25 €
|
 |
OBD-2 Cable-Extension A
(#30049)
Male OBD-2 (SAE J1962) plug on female OBD-2 (SAE J1962) plug,
cable length about 3,0 m
Full wired.
|
90 €
|
 |
OBD-2 Cable-Extension B
(#32009)
Male OBD-2 (SAE J1962) plug on female OBD-2 (SAE J1962) plug,
Cable length about 3,0 m
|
53 €
|
