|
Prodaja:
Pomoæni pribor za auto dijagnostiku
 |
Null Modem Mini-Adapter DB9m/DB9m
(#30090)
To the connection of the serial cable (' HotSync' cable) of a PDA (pocket PC or PALM OS) with an ELM interface.
For the diagnosis of a vehicle with a PDA altogether you need:
- PDA (PalmOs or Pocket-PC / WinCE)
- to the PDA due ´HotSync´-cable
- ELM-Interface (serial!)
- Null Modem-Adapter DB9m/DB9m
- Software (Freeware or commercial, for example ´DigiMoto´)
|
25 €
|
 |
Powerstation for OBD-2/EOBD interfaces
(#30067)
Powerstation for testing OBD-2 interfaces without a connected car, 12 volts, 500 mA with female OBD-2 connector (J1962) to connect all interfaces like AMX530, ScanTool interfaces, Vehicle Explorer interfaces and others.
No risk to mix up polarity, only connect the OBD-2 connector of the interface to the standard J1962 connector of the powerstation. The powerstation supplies the power usually coming from the car.
|
30 €
|
 |
Serial cable connection, 1.8m
(#30010)
Sub-D 9pol (socket) on Sub-D 25pol (plug).
To the connection of the ScanTool (ElmScan) interface with the serial interface of your PC's.
|
7.50 €
|
 |
USB - RS232 Mini-Cable for OBD-2 Interfaces
(#30011)
This small USB converter cable converts the USB connection to RS232 (COM-Port). The typical Baud rates are supported from 1.200 to 115 k. The converter cable is full Plug & Play. Appropriate ones DEVICE drivers for integration under Windows are attached to the product on a mini CD. Beside the usual devices such as modems, Palmtops, Digicam, can be used also all other COM based Windows applications for communication.
- Baudrate 1.200 - 115,2 k
- USB 1.1 OHCI (1,5 und 12Mbps)
- Plug and Play
- Cable ca. 30cm
- incl. Driver for Windows 98/98SE/ME/2000/XP
- for Modems, Palmtops, Digicam...
We have tested this cable with "Vehikel Erkunder", "Elektor"-Kit and "Scantool"-Kit. Most of cheaper converter will not work with these products - OUR cable will do :-)
|
23 €
|
|
 |
